Reebok T5.2 User Manual page 16

Computer
Reebok T5.2 Treadmill
To Edit A Previously Saved Programme
Edit The Speed And Incline Without Extending The Previously
Saved Workout Time:
Press the SPEED and and INCLINE
and incline level during the workout then follow the
the workout.
Extend The Workout Time From The Previously Saved Programme:
If you want to extend the total workout time from the previously saved programme
press the button anytime during the workout. After completing the previously
saved programme the treadmill will start a one-minute cool down session. Press
the button again during the cool down session and the treadmill will skip the
cool down procedure and continue running at a speed of 3.2 km/h/2.0 mph and
incline of level 0. Press the SPEED and
every minute section then follow the
If you have already pressed the button once during the workout but change
your mind about extending the workout time, press
until the previous saved program finishes, complete the cool down period,
then follow the procedure.
To Set-up & Up-grade
1. Touch to perform the time/date set up or software update.
2. Touch to set up the date and time.
3. Touch to perform the software update and data input/output.
4. Touch to load the personal training programme from USB memory.
5. Touch to output the user workout information to USB memory.
6. Touch to load the sight map running programme from USB memory.
7. Touch to update the software version.
RFE4489_RE013441_T5.2__UMFINAL.indd 28-29
Customer Support 0800 440 2459
and buttons to change the speed
procedure after completing
and INCLINE and buttons for
procedure after completing the workout.
button again. Or wait
28
Reebok T5.2 Treadmill
WARNING!
Please contact technical support prior to updating the main software of
your computer. Failure to do could cause the computer to malfunction.
Please ensure you DO NOT cut off the power while the software is updating.
The software update could take up to 10 minutes dependent on the version
of software you are using.
29
reebokfitness.info
28/06/2010 12:12