Filling Chain Oil Tank - Stihl HT 100 Instruction Manual

English

Filling Chain Oil Tank

NOTICE
A full chain oil tank is sufficient for only
half a tankful of fuel. Check the oil level
regularly during cutting work. Never
allow the oil tank to run dry.
Preparations
Thoroughly clean the oil filler cap
N
and the area around it to ensure that
no dirt falls into the tank.
Position the machine so that the
N
filler cap faces up.
22
Opening
Raise the grip until it is upright.
N
Turn the cap counterclockwise
N
(about a quarter turn).
Marks on filler cap and oil tank must line
up.
Remove the cap.
N
Filling up with chain oil
Filling up with chain oil
N
Take care not to spill chain oil while
refilling and do not overfill the tank.
Closing
Grip must be vertical:
Fit the cap – marks on filler cap and
N
oil tank must line up.
Press the cap down as far as stop.
N
HT 100, HT 101, HT 130, HT 131