Fueling - Stihl HT 100 Instruction Manual

English

Fueling

Preparations
Before fueling, clean the filler cap
N
and the area around it to ensure that
no dirt falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
Position the machine so that the
N
filler cap is facing up.
WARNING
In order to reduce the risk of fire and
personal injury from escaping gas vapor
and fumes, remove the fuel filler cap
carefully so as to allow any pressure
build-up in the tank to release slowly.
One of two different filler caps is
installed as standard at the factory.
20
Toolless filler cap (with folding grip)
Threaded filler cap
Opening the toolless filler cap
Swing the grip into an upright
N
position.
Turn the cap counterclockwise
N
(approx. 1/4 turn).
Remove the filler cap.
N
Refueling
Take care not to spill fuel while fueling,
and do not overfill the tank.
Closing the toolless filler cap
Position the cap with the grip in an
N
upright position; the raised
positioning marks must line up.
Turn cap clockwise as far as it will
N
go (approx. 1/4 turn).
HT 100, HT 101, HT 130, HT 131