Panasonic Lumix DMC-ZS50 Owner's Manual page 286

Others
[Failed to connect wireless access point] / [Connection failed] / [No destination found]
●
Check following regarding the wireless access point.
→ The wireless access point information set on this unit is wrong. Check the authentication type,
encryption type, and encryption key.
→ Power of the wireless access point is not turned on.
→ Setting of the wireless access point is not supported by this unit.
●
Check the network setting of the destination.
●
Radio waves from other devices may block the connection to a wireless access point.
→ Check other devices that are connected to the wireless access point and devices that use the
2.4 GHz band.
[No picture to send]
●
This is displayed when there is no image to transmit due to the restriction of the destination.
Check the file type of the image to transmit.
[Connection failed. Please retry in a few minutes.] /
[Network disconnected. Transfer stopped.]
●
Radio waves from the wireless access point are getting weak.
→ Perform the connection closer to the wireless access point.
●
There is no reply from the server or it has exceeded the communication processing time.
→ Try again after a while.
●
Depending on the wireless access point, connection may be automatically disconnected after
specific time has passed.
→ Reconnect the connection again.
[Upload to the Cloud Folder is available after Cloud Sync settings have been set up on
downloadable devices such as PCs or smartphones.]
●
Devices that download images from a cloud folder are not registered.
●
Perform Cloud Sync setting. Configure the settings on a PC with "PHOTOfunSTUDIO" or on a
smartphone with "Image App". For details on [Cloud Sync. Service], refer to (→234).
[Connection failed]
●
Check following regarding the smartphones you intend to connect.
→ The smartphone does not operate.
→ Change the access point to connect to in the smartphone Wi-Fi settings to this camera.
→ There is no free storage space on the smartphone.
[Login failed. Please check Login ID and Password.]
●
Login ID or password for the "LUMIX CLUB" is not correct. Please enter it again. If you have
forgotten the login ID or the password, there is information in the login screen of the "LUMIX CLUB"
website.
[Some files cannot be sent because of destination limit] /
[Transfer completed. Some files are left because of destination limit.]
●
Check the file format of the image to send.
●
Sending motion pictures may fail if the file size is too large. Split the motion picture using [Video
Divide]. (→179)
(→252)
(→213, 219, 220, 223, 229, 234)
- 286 -
Message displays
SQW0195