Program Shift - Panasonic Lumix DMC-ZS50 Owner's Manual

Basics

Program Shift

The function for maintaining the same exposure (brightness) while changing the shutter
speed and aperture value combination is called "Program Shift". You can use "Program
Shift" to take pictures by adjusting the shutter speed and aperture value even in [Program
AE] Mode.
Press the shutter button halfway
• The shutter speed and aperture value are displayed in yellow on the screen.
While the numeric values are being displayed in yellow
(approximately 10 seconds), turn the control ring or control
dial to select the combination of shutter speed and aperture
value
[ ] is displayed during Program Shift (while the combination of a shutter speed and aperture
value is being changed).
• To cancel Program Shift
→ Turn the control ring or control dial until [
disappears.
Taking pictures with your own settings [Program AE] Mode
Exposure meter
Shutter speed (Automatic adjustment)
Aperture value (Automatic adjustment)
] (Program Shift indication)
- 46 -
SQW0195