Preparations
Inserting and removing the card (optional)
• Make sure that the camera is turned off.
Slide the release lever to the
[OPEN] position and open the card/
battery door
Insert the card all the way
• Push in until it clicks.
Close the card/battery door and
then slide the release lever to the
[LOCK] position
■
To remove card
Press the center of the
card
●
Keep the Memory Card out of reach of children to prevent swallowing.
●
To remove the card, turn the camera off and wait until the LUMIX indicator on the
screen goes off. (Failure to wait may cause the camera to malfunction and may
damage the card or recorded data.)
Press
Pull out
- 24 -
[OPEN] [LOCK]
Card (Check orientation)
Do not touch the terminals on
the back of the card.
Release lever
SQW0195