Wi-Fi/NFC
■
Writing location information to a picture
Preparations:
(On the camera) Connect to a smartphone
Operate the smartphone
Start "Image App"
Select [
]
Select [
]
Select [ ]
• Follow the messages on the screen to perform the operation.
• [
] is displayed for pictures that have location information written to it.
• You can also use [Location Logging] in the [Playback] menu to write the sent
location information to the pictures.
●
Caution:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the
subject when you use this function. Use at your own risk.
●
You cannot add location information to the following pictures:
• Pictures that already have location information
• Motion pictures recorded in [AVCHD] format
• Protected pictures
• Pictures recorded in the built-in memory
• Pictures recorded using cameras other than this unit
●
Location information may not be written if there is not enough free space on your
card.
●
You cannot write location information to a card if the write-protect switch on the card is
set to the [LOCK] position.
●
For details about the operating procedure, etc., refer to [Help] in the "Image App"
menu.
●
If you have changed the clock setting of this unit or the smartphone after [Time sync],
perform [Time sync] again. Refer to [Help] in the "Image App" menu for details.
●
On the smartphone, you can set the acquisition interval of location information and
check the transfer status of location information. Refer to [Help] in the "Image App"
menu for details.
●
You cannot write location information when the unit is connected to a PC or printer.
Operating the camera using a smartphone/tablet
(→194)
(→174)
- 212 -
SQW0195