Panasonic Lumix DMC-ZS50 Owner's Manual page 221

Wi-Fi/NFC
■
Sending a picture each time one is recorded ([Send Images While
Recording])
Select [New Connection] in the [Wi-Fi] menu, and press
[MENU/SET]
Use cursor button to select [Send Images While Recording],
and then press [MENU/SET]
Use cursor button to select [AV device], and then press
[MENU/SET]
Select [Via Network] or [Direct] to connect
Select the device you wish to connect to
• When the connection is established, the confirmation screen for the transmission
setting is displayed. Check the setting and press [MENU/SET]. To change the
send setting, press the [DISP.] button.
Take still pictures
• To change the setting or disconnect, press [Wi-Fi] button.
You cannot change the settings while sending still pictures. Wait until sending is
complete.
(→61)
- 221 -
Sending pictures to AV equipment
(→249)
(→258)
(→190)
SQW0195