Misc(3) Tab; Synchronizing With The Server; Manual Synchronization - Symbol MC9000-G Product Reference Manual

9-10 MC9000-G for Embedded Windows® CE .NET Product Reference Guide

Misc(3) Tab

This tab is used to configure various miscellaneous features.
Field
Use DHCP server
Use DHCP bootfile This check box control specifies whether the AirBEAM Smart Client uses the DHCP response

Synchronizing with the Server

When the synchronization process is initiated, the AirBEAM Smart Client attempts to open an FTP
session using the AirBEAM Smart Client configuration. Once connected, the client processes the
specified packages. Packages are loaded only if the server version of a given package is different from
the version loaded on the client. Once the upload process is complete, the AirBEAM Smart Client
closes the FTP session with the server.
The AirBEAM Smart Client can launch an FTP session with the server either manually, when initiated
by the user, or automatically.

Manual Synchronization

1. Configure the AirBEAM Smart Client. See
9-4.
2. From the main AirBEAM CE window, select File - Synchronize.
Table 9-6. Misc (3) Tab
This checkbox control specifies whether the AirBEAM Smart Client uses the DHCP response
option 66 to specify the IP address of the FTP/TFTP server.
If enabled, special RF network registry settings are required to force the DHCP server to return
the "TFTP server name" field (option 66). The special RF network registry settings are included,
but commented out, in the radio network registry initialization files (essid_xxxx_yy.reg).
option 67 to specify the Package and Package 1 parameters.
If enabled, special RF network registry settings are required to force the DHCP server to return
the "Bootfile name" field (option 67). The special RF network registry settings are included, but
commented out, in the radio network registry initialization files (essid_xxxx_yy.reg).
Description
Configuring the AirBEAM Smart Client on page