Microap Tab - Symbol MC9000-G Product Reference Manual
Hide thumbs
Also See for MC9000-G:
- Product reference manual (646 pages) ,
- Quick start manual (2 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
MicroAP Tab
Use the MicroAP tab to configure the mobile computer to operate as an AP. The MicroAP establishes
a single-cell wireless network for devices in mobile unit mode.
Each MicroAP requires a unique ESSID. MicroAP cells can coexist as separate individual networks
within the same site without interference. The MicroAP does not roam, but it does support roaming.
The mobile computer in MicroAP mode operates in CAM, and supports devices operating in both PSP
and CAM. The MicroAP supports up to 16 mobile computers.
1. Tap the Enable MicroAP checkbox to support MicroAP operations.
2. Tap the 1 or 2 Megabit Base Rate checkboxes to specify the data rate within the MicroAP
cell. A MicroAP and the mobile computer are required to use the same data rate.
3. Tap the Frequency Hop Settings drop-down list to establish the Hop Set, Hop Sequence and
DTIM Delay to be used within the MicroAP cell.
Figure 6-19. MicroAP Tab
Spectrum24 Network Configuration
27
6-
Advertisement
Table of Contents
