Symbol MC9000-G Product Reference Manual page 178
Hide thumbs
Also See for MC9000-G:
- Product reference manual (646 pages) ,
- Quick start manual (2 pages) ,
- Product reference manual (530 pages)
Table of Contents
Advertisement
6-16
MC9000-G for Embedded Windows® CE .NET Product Reference Guide
MAC Address
Host Name
4. Tap Renew to refresh the information displayed on the IP Status tab. The mobile device is
releases the existing IP address and requests a new IP address from a DHCP server.
5. Select the Ping tab to send and receive ICMP ping packets across the network to the
specified IP address.
6. In the IP drop-down list, select a target device IP address.
7. In the Size drop-down list, select the size of the packet transmission.
8. Tap Start Test to begin the ping test.
9. Tap Stop Test to terminate the ping test.
The average mega-bits per second, signal strength, data rate currently in use, test statistics
and round trip (RT) times are displayed for each test. The associated AP MAC address is also
displayed. The signal strength level and the data transmission rate are displayed in real-time
bar graphs.
An IEEE 48-bit address assigned at the factory that uniquely identifies the adapter at
the physical layer.
Displays the name of the mobile computer.
Figure 6-11. Mobile Companion - Ping Tab
Advertisement
Table of Contents
