Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dahua IPC-HUM8101
Summary of Contents for Dahua IPC-HUM8101
- Page 1 HD Pinhole Network Camera Quick Start Guide Version 1.0.0...
- Page 2 Welcome Thank you for purchasing our network camera! This quick start guide is designed to be a reference tool for your system. Please keep this start guide well for future reference. Please open the accessory bag to check the items one by one in accordance with the list below. Contact your local retailer ASAP if something is missing or damaged in the bag.
- Page 3 Thunder-proof device is recommended to be adopted to better prevent thunder. The grounding studs of the product are recommended to be grounded to further enhance the reliability of the camera. 6. Daily Maintenance Please shut down the device and then unplug the power cable before you begin daily maintenance work.
-
Page 4: Table Of Contents
Table of Contents Device Framework ........................1 Port Name........................1 Dimension ........................2 Bidirectional Talk ......................4 1.3.1 Device-end to PC-end ....................4 1.3.1 PC-end to the Device-end ..................4 Alarm Setup ........................4 Device Installation ........................5 Quick Configuration Tool ......................6 Overview ........................ -
Page 5: Device Framework
1 Device Framework 1.1 Port Name Note: The framework figures in this chapter are just for reference, there is some minor difference between the appearance of products and the corresponding figures, so please refer to the actual products. You can refer to the following figures for port information. -
Page 6: Dimension
Port Port Name Connector Function Note Micro SD Micro SD Micro SD Micro SD card storage Card Card slot Sensor Connect front end Sensor board, get image Sensor port SENSOR board data. Ethernet Network port Connect standard Ethernet cable port Power input Power port, input DC12 V or POE power DC12V... - Page 7 Figure 1-3 Figure 1-4 Figure 1-5...
-
Page 8: Bidirectional Talk
1.3 Bidirectional Talk 1.3.1 Device-end to PC-end Device Connection Please connect the speaker or the MIC to the audio input port of the device. Then connect the earphone to the audio output port of the PC. Login the Web and then click the Talk button to enable the bidirectional talk function. You can see the button becomes orange after you enabled the bidirectional talk function. -
Page 9: Device Installation
2 Device Installation Important Please make sure the installation surface can min support the 3X weight of the camera and the bracket. Figure 2-1 Please see Figure 2-1. Step 1 Stick installation position map to designated surface where you will install the device Step 2 Dig a hole according to position of hole on installation position map. -
Page 10: Quick Configuration Tool
3 Quick Configuration Tool 3.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 3.2 Operation Double click the “ConfigTools.exe”... - Page 11 Figure 3-2 Login prompt After you logged in, the configuration tool main interface is shown as below. See Figure 3-3. Figure 3-3 Main interface For detailed information and operation instruction of the quick configuration tool, please refer to the Quick Configuration Tool User’s Manual included in the resources CD.
-
Page 12: Web Operation
4 Web Operation This series network camera product supports the Web access and management via PC. Web includes several modules: monitor channel preview, system configuration, alarm and etc. 4.1 Network Connection Please follow the steps listed below for network connection. ... - Page 13 Figure 4-2 Web login After you successfully logged in, please install WEB plug-in unit. Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction. See Figure 4-3. Figure 4-3 Web monitoring window...
-
Page 14: Appendix Toxic Or Hazardous Materials Or Elements
Appendix Toxic or Hazardous Materials or Elements Component Name Toxic or Hazardous Materials or Elements Cr VI PBDE ○ ○ ○ ○ ○ ○ Circuit Board Component ○ ○ ○ ○ ○ ○ Device Construction Material ○ ○ ○ ○ ○...
Need help?
Do you have a question about the IPC-HUM8101 and is the answer not in the manual?
Questions and answers