ATCOM AT840 Quick Start Manual page 4

AT840 Quick Start Guide
C. Repeat A and B. It is the right picture of putting on desk after
fixing the two feet below:
D. Disassemble the feet:
Press the plate with word "PUSH" and pull the feet with the
direction of arrow. When the plate is pull out of the slot (there
will be a sound of "pa") you can take off the feet
2) On wall position
A. Put the bottom side of the IP phone upside and push the plate
with letter "PUSH" into the slot, please refer the picture as
below:
B. Push the other plate into the slot in accordance with the
direction of the arrow
C. Repeat A and B. It is the picture of wall mounting after fixing
the two feet below:
ATCOM TECHNOLOGY CO., LIMITED