Table of Contents
Advertisement
7. Configuration modes and utilities
Example:
interpretation:
EPROM version:
flash memory upgrade with RS-232 cable 0-364032-00
\41\4A\0F\31\60
- necessary for online upgrade of the ScanPlus
flash memory if you use RS-232 cable 0-
364032-00 !
- do not send this command directly from
EasySet to the ScanPlus - you must read this
command as a configuration code (send to the
setup sheet and print out) !!!
- not necessary for flash memory upgrade if you
use special download cable 0-605032-00
- see section 1 "Using EasySet" for details on
how to connect up for flash memory upgrade
(RS-232 cable or special download cable)
122
display EPROM software / CPU versions
- EPROM / CPU version display on terminal screen
- EPROM software version = < N . N > [ L ] , CPU
version = < N . N >
Example :
- EPROM version beeps :
< 1 long beep >
< 6 long beeps >
N + 1
0.
- displays data string and checksum values on a
terminal screen when you read configuration bar
*S/SR 0.5B CPU 1.0 *
< 2 short beeps >
N + 1
alphabet position
5
B
display data string mode
ScanPlus S Series - Installation Manual
\46\43\60
\46\4E\60
Advertisement
Table of Contents
