Aux; Kenwood Remote Application - Kenwood DPX505BT Instruction Manual

AUX

You can listen to music from a portable audio player via the auxiliary input
jack.
Preparation:
Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. (Page 6)
Start listening
1 Connect a portable audio player (commercially available).
Auxiliary input jack
3.5 mm (1/8") stereo mini plug with "L"
shaped connector (commercially available)
Press B SRC repeatedly to select AUX.
2
3 Turn on the portable audio player and start playback.
Set the name of the external device
While listening to a portable audio player connected to the unit...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [SYSTEM], then press the knob.
3
Turn the volume knob to select [AUX NAME SET], then press the knob.
4
Turn the volume knob to select an item, then press the knob.
[AUX] (default)/[DVD]/[PORTABLE]/[GAME]/[VIDEO]/[TV]
5
Press and hold to exit.
To return to the previous setting item, press
16
ENGLISH

KENWOOD Remote Application

You can control the KENWOOD car receiver from iPhone/iPod touch (via
Bluetooth or via USB input terminal) or Android device (via Bluetooth) using
KENWOOD Remote application.
• For more information, visit <https://www.kenwood.com/cs/ce/>.
Preparation:
Install the latest version of KENWOOD Remote application on your device
before connecting.
Start using KENWOOD Remote application
Portable audio
1
player
2
3
Settings to use KENWOOD Remote application
1
2
3
4
.
To return to the previous setting item, press
Start up the KENWOOD Remote application on your device.
Connect your device.
• For Android device:
Pair the Android device with this unit via Bluetooth. (Page 18)
• For iPhone/iPod touch:
Connect iPhone/iPod touch to the USB input terminal. (Page 9)
(or)
Pair the iPhone/iPod touch with this unit via Bluetooth. (Page 18)
(Make sure the USB input terminal is not connected to any device.)
Select the device to use from the [FUNCTION] menu.
See the following " Settings to use KENWOOD Remote application".
By default, [ANDROID] is selected. To use iPhone/iPod touch, select [YES] for
[IOS].
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select an item (page 17), then press the
knob.
Repeat step 2 until the desired item is selected/activated.
Press and hold to exit.
.