Revo R16DVR5 User Manual page 72

User's Manual
You can also narrow your event search by selecting the Option... button and setting up the new search condition.
You can search video from the first to last recorded images, or you can set the start and stop times and dates.
Highlight the box beside From and press the
a specific Date and Time. When set to On, the search will be from the first recorded image. When highlighting
and pressing the button the bookmark list displays and the bookmark point you selected will be the starting date
and time.
Highlight the box beside To and press the
specific Date and Time. When set to On, the search will be from the last recorded image . When highlighting
pressing the button the bookmark list displays and the bookmark point you selected will be the ending date and time.
Highlight the box beside Check Time Overlap and press the
only be able to turn the Check Time Overlap on or off if a user-defined date and time is set to From and To. If the
DVR's date and time have been reset, it is possible for the DVR to have more than one overlapping start and stop time.
When set to On, you will be asked to select one of the overlapping start and stop time. When set to Off, the DVR will
display search results from all start times to all stop times.
Highlight the box beside Alarm-In and press the
in your search.
Highlight the box beside Motion and press the
of motion.
Highlight the box beside Video Loss and press the
reports of lost video.
Highlight the box beside Video Blind and press the
reports of blind video.
Highlight the box beside Text-In and press the
reports of text input.
Highlight the box beside Record Channels and press the
search for any reports of event recorded data. The DVR will display the events (not the camera channels) that
occurred and that also are recorded on the camera channel that you selected. If you do not select a camera channel in
this field, the DVR will search events that are not associated with cameras.
You can also toggle On and Off self-diagnostic System Events as part of your search. The choices are:
 Panic Record
 Check Recording
 Check Alarm-In
 Disk Almost Full
 Disk Bad
 Disk Temperature
 Disk S.M.A.R.T.
 Fan Error
 Disk Config Change
64
button to toggle between On and Off. When set to Off, you can enter
button to toggle between On and Off. When set to Off, you can enter a
button. It toggles between On and Off. You will
button. You can select the alarm inputs that you want to include
button. You can select the cameras for which you want any reports
button. You can select the cameras for which you want any
button. You can select the cameras for which you want any
button. You can select the text-in devices which you want any
button. You can select the cameras that you want to
and