Web Monitoring Mode - Revo R16DVR5 User Manual

User's Manual
NOTE: There might be a problem with screen display or screen update due to low image transmission speed
when using the Microsoft Windows Vista or higher operating system. In this situation, it is
recommended that you disable the Auto Tuning capability of your computer.
Run the Command Prompt with elevated administrator permissions (Go to the Start Menu 
Accessories  Command Prompt  Click the right mouse button and select the Run as administrator
option). Then enter "netsh int tcp set global autotuninglevel=disable" and hit the enter key.
Restart your computer to apply the changes.
If you want to enable the Auto Tuning capability again, enter "netsh int tcp set global autotuninglevel=
normal" after running the Command Prompt with elevated administrator permissions. Restart your
computer to apply the changes.

Web Monitoring Mode

Remote Watch is a remote web monitoring program that allows you to monitor live video transmitted in real-time
from the remote DVR.
① Click the to log out the REVO Remote program.
② Click the to access to the web search mode.
③ Position the mouse pointer on the Remote Watch logo to see the version of the REVO Remote program.
④ The DVR information window displays the login information of REVO Remote.
⑤ Click the screen format to select the desired display mode. When changing the screen format, the selected camera
on the current screen will be located in the first cell of the new layout.
⑥ Click the camera button to select the camera to be viewed.
⑦ Click the to adjust the brightness, contrast, saturation and hue of monitoring image.
⑧ Click the to control pan, tilt and zoom of the camera from a remote site.
⑨ Click the to control alarm out devices at the remote site.
76