Program Location 13 (PL13)
Coin Accumulation Minimum Amount for More Time
Amount Decrease
("Hold In" to Accelerate)
Proceed to next location
Summary: The amount to start is programmable from 1 to 9999.
32
Refer to Programming
Instructions for instructions on
entering program locations.
LO Temp
to be changed
Location to be viewed/changed.
PL13
Perm Press
Press "Perm Press" key.
Display will read "AFAt," amount for
additional time (ACOn mode only) for
AFAt
3-seconds and then amount programmed.
If no change, press "Perm Press" key,
otherwise press "HI" or "LO" key and
then "Perm Press" key.
(Wait 3-Seconds)
10
Perm Press
PL14
To exit program mode,
open program switch
Amount Increase
HI Temp
("Hold In" to Accelerate)