Program Location 05 (PL05)
LO Temp
NOTICE: To eliminate potential
overheating do not set temperature
in PL03, PL05, and PL07 above
150° F (65° C)
Temperature Decrease
Summary: LO Temp is programmable from a minimum of 100 ° F to a maximum of 190 ° F in ten-degree increment s or from a
minimum of 38° C to a maximum of 88° C in five-degree increments.
24
Refer to Programming
Instructions for instructions on
entering program locations.
LO Temp
Automatically goes
into PL06 Program without
PL06 Display Mode
Continued on next page
PL05
Perm Press
LO°F
(Wait 3-Seconds)
Temperature Increase
120F
Perm Press
Location to be viewed/changed.
Press "Perm Press" key.
Display will read "LO°F," LO Temp
status for 3-seconds and then the
actual temperature programmed.
If no changes, press "Perm Press"
key otherwise press "HI" or "LO"
key and then "Perm Press" key.
HI Temp