Program Location 03 (Pl03) - Laundrylux DAWS0 SERIES Operating Manual

Program Location 03 (PL03)

HI Temp
NOTICE: To eliminate potential
overheating do not set temperature
in PL03, PL05, and PL07 above
150° F (65° C)
Temperature Decrease
Summary: HI Temp is programmable from a minimum of 100 ° F to a maximum of 190 ° F in ten-degree increment s or from a
minimum of 38° C to a maximum of 88° C in five-degree increments.
22
Refer to Programming
Instructions for instructions on
entering program locations.
Perm Press
(Wait 3-Seconds)
LO Temp
Perm Press
Automatically goes
into PL04 Program without
PL04 Display Mode
Continued on next page
Location to be viewed/changed.
PL03
Press "Perm Press" key.
Display will read "HI°F," "HI Temp"
key status for 3-seconds and then
the actual temperature programmed.
If no changes, press "Perm Press"
key otherwise press "HI" or "LO"
HI°F
key and then "Perm Press" key.
Temperature Increase
150F HI Temp