Program Location 02 (PL02)
Percent dry from 90 to 100%
Dryness Level Decrease
Summary: The percentage of dryness is programmable from a minimum of 90% to a maximum of 100%.
Refer to Programming
Instructions for instructions on
entering program locations.
LO Temp
("Hold In" to Accelerate)
Proceed
to next
location to
be changed
PL02
Location to be viewed/changed.
Display reads "PdrY" percent of dryness
and the actual numeric value programmed
Perm Press
(90-100%). If no change, press "Perm
Press" key, otherwise press the "HI" or
"LO" key and then "Perm Press" key.
PdrY
(Wait 3-Seconds)
Dryness Level Increase
100
("Hold In" to Accelerate)
Perm Press
PL03
To exit
program
mode open
or
program
switch
HI Temp
21