Program Location 10 (Pl10) - Laundrylux DAWS0 SERIES Operating Manual

Program Location 10 (PL10)

Right Coin Denomination
Amount Decrease
("Hold In" to Accelerate)
Summary: The right coin denomination is programmable from 1 to 9999.
IMPORTANT: When the dryer is equipped with a dual coin acceptor, the value set here is the higher value denomination,
which is not necessarily the right coin portion of the acceptor.
NOTE: For single coin models this parameter need not to be set.
Refer to Programming
Instructions for instructions on
entering program locations.
LO Temp
Proceed to next location
to be changed
PL10
Perm Press
rCdE
(Wait 3-Seconds)
25
Perm Press
PL11
To exit program mode,
open program switch
Location to be viewed/changed.
Press "Perm Press" key.
Display will read "rCdE," right coin
denomination for 3-seconds and the
right coin acceptor denomination
programmed (I.E. 25¢). If no
change, press "Perm Press" key,
otherwise press "HI" or "LO"
key and then "Perm Press" key.
Amount Increase
HI Temp
("Hold In" to Accelerate)
29