Draytek Vigor2760 series User Manual page 323
High speed vdsl2 router
Hide thumbs
Also See for Vigor2760 series:
- User manual (619 pages) ,
- Quick start manual (39 pages) ,
- Quick start manual (25 pages)
Table of Contents
Advertisement
The major difference between these two modes is that: while in Repeater mode, the packets
received from one peer AP can be repeated to another peer AP through WDS links. Yet in
Bridge mode, packets received from a WDS link will only be forwarded to local wired or
wireless hosts. In other words, only Repeater mode can do WDS-to-WDS packet forwarding.
In the following examples, hosts connected to Bridge 1 or 3 can communicate with hosts
connected to Bridge 2 through WDS links. However, hosts connected to Bridge 1 CANNOT
communicate with hosts connected to Bridge 3 through Bridge 2.
Click WDS from Wireless LAN menu. The following page will be shown.
Available settings are explained as follows:
Item
Mode
Description
Choose the mode for WDS setting. Disable mode will not
invoke any WDS setting. Bridge mode is designed to fulfill
the first type of application. Repeater mode is for the
311
Vigor2760 Series User's Guide
Advertisement
Table of Contents
