To use Advance Mode, do the following steps:
1. Click the Advance Mode radio button.
2. Click Index 1 to access into the following page.
Available settings are explained as follows:
Item
Enable
Protocol
Source IP
Vigor2760 Series User's Guide
Description
Check this box to enable this policy.
Use the drop-down menu to choose a proper protocol for
the WAN interface.
Any – Any IP can be treated as the source IP.
Src IP Start - Type the source IP start for the specified
WAN interface.
Src IP End - Type the source IP end for the specified
WAN interface. If this field is blank, it means that all the
source IPs inside the LAN will be passed through the WAN
interface.
150
Need help?
Do you have a question about the Vigor2760 series and is the answer not in the manual?
Questions and answers