Specifications - Rexel ProStyle Instruction Manual

Specifications

Cutting Type
Shred Size
Security Class
Sheet Capacity (one pass)
Entry Width
Product Dimensions
Rated Voltage/Frequency
Rated Current
Introduction
Thank you for choosing this Shredder from Rexel. We are sure it will
serve you well, but please take a little time to read these instructions to
ensure you get the best out of your machine.
Safety First
• Please store this instruction manual in a safe place for future
reference.
• Please pay close attention to the safety symbols on the top of the
shredder and operate the machine accordingly.
• If the shredder needs cleaning, unplug the unit from the power socket
and use a damp cloth. NB. Do not use any cleaning products to clean
the unit.
• Do not position the unit near to an object that radiates heat.
• Do not place the unit in a damp environment.
• Take care not to splash any liquid onto the machine.
• Return the product and proof of purchase with receipt to the store at
which it was purchased if...
- The power cable or plug is broken.
- The machine malfunctions because liquid was accidentally spilt onto
the machine.
- The shredder doesn't operate despite following the guidelines in the
manual.
• Make sure the power cable isn't a trip hazard.
• Please ensure the power supply is compatible with the requirements
of the machine (220-240V 50Hz).
• To avoid risk of injury, do not open the machine's casing to attempt DIY
repair. Any attempted repair by an unqualified person will invalidate
the warranty.
m
DO NOT attempt to repair shredder yourself.
KEEP OUT OF REACH OF CHILDREN.
4
Rexel ProStyle Shredder Rexel Style+ Shredder
Confetti Cut Confetti Cut
4 x 35mm 4 x 23mm
DIN S3 DIN S3
11 sheets (80 gsm) 7 sheets (80 gsm)
230mm 230mm
430 x 232 x 410mm 378 x 203 x 360mm
220-240V~50Hz 220-240V~50Hz
2A 1.6A
m
Rexel Style CC Shredder
Confetti Cut
4 x 30mm
DIN S3
5 sheets (80 gsm)
230mm
340 x 185 x 320mm
220-240V~50Hz
0.8A
Description of product parts (fig 1)
1 Power Cable (Euro plug shown)
2 Viewing window
3 Paper entry slot
Preparation before use
How to use the shredder correctly:
Take care not to insert fingers, ties or other objects into the entry
1
slot of the shredder.
Try to avoid laminating materials, plastic bags etc. from being
2
passed through the shredder. This will prevent damage to the
cutters.
Do not shred wet paper as it can tangle in the cutters.
3
Do not shred more than the stated sheet capacity in one pass.
4
5 Do not shred continuously for more than 3 minutes at a time (2
minutes Style RC). Running the unit for too long may make the motor
overheat. If the motor over heats, allow it to cool down for at least
30 minutes before resuming use.
6 Do not use the "REV" ( ) (reverse) function if it's not necessary.
Over use of the "REV" ( ) function can result in shredded paper
becoming jammed in the entry slot, which will adversely affect the
performance of the shredder.
Correct operating procedure (fig 2)
1 Insert plug into the AC power socket.
Check the shredder bin is fully closed.
2
Push the switch to the ON/AUTO position (standby mode)
3
When not in use, push the switch to the O (off position)
4
Rexel Style RC Shredder
Ribbon Cut
5.8 mm
DIN S2
7 sheets (80 gsm)
230mm
340 x 185 x 320 mm
220-240V- 50 Hz
0.8A