Factory-Presets - UHL Instruments X3-1 Owner's Manual

Factory-Presets

Live-Preset (= Preset 0, current drawbar status after switch-on)
The following message appears on the display:
Initially after switch-on the Live-Preset will be indicated (= Preset 0). The upper line indicates the drawbar
settings of the upper manual (U), the lower line indicates pedal drawbars (P) and lower manual (L) settings.
Factory-Presets
The X3 provides 14 presets each for the upper and lower manual. Use the Up/Down buttons to move the cursor
to the upper or lower manual. Then turn the Data Entry knob to select one of the 14 presets for each manual.
In the following picture the cursor is located at lower manual for which preset 6 is selected. Fort he upper
manual preset 4 is selected.
Live-Preset Nr. 0 Upper Manual
Live-Preset Nr. 0 Lower Manual
Factory-Preset Nr. 4 Upper
Manual
Factory-Preset Nr. 6 Lower Manual
C o p y r i g h t b y U h l - I n s t r u m e n t s
Menu-Cursor
Menu-Cursor
M a n u a l Page 21