Os Updates - UHL Instruments X3-1 Owner's Manual

OS Updates

Firmware updates will be available for download on our website www.uhl-instruments.de.
After download unzip and extract all files to a new folder on your desktop. Then repeat the steps described
under „X3 Remote"Instruction Manual (see page 26).
Update Sound Engine (FPGA)
1. Click on the button [FPGA]
Update Controller Firmware (AVR)
1. Click on the button [Update FW]
AVR update process takes about 3 minutes. Please wait until the AVR update is
finished before you go to the next step.
Opens
FPGA update process takes about 3 minutes. Please wait until the FPGA update is
finished before you go to the next step.
Opens
C o p y r i g h t b y U h l - I n s t r u m e n t s
2. Doubleclick on FPGA-file
2. Doubleclick on
„fpga_uhl_instruments001.bit"
„ fw_uhl_instruments001.hex"
M a n u a l Page 28