Live-Preset; Change Factory-Presets - UHL Instruments X4 V Series Owner's Manual

Live-Preset

After switching on the X4 V, the following message appears on the display
(the current real drawbar positions are played):
Factory-Presets
The X4 V has 14 factory presets each for the Upper Manual, Lower Manual and Pedal Bass.
Turn the rotary knob to access the various factory presets.
For example: Call up the factory preset "01" - turn the knob one grid to the right:

Change Factory-Presets

The factory presets can be changed individually and replaced by their own factory presets.
In the example factory preset "01" should be changed. Only the drawbar settings of the upper manual should be
changed. First call up the factory preset "01" (turning the knob one grid to the right):
By pressing the "Menu Down" button once you get to "U01"
(default drawbar settings of the Upper Manual):
Now set the real drawbars of the Upper-Manual as desired. The changes in the drawbars are shown in the
display behind Drb (Drawbar):
C o p y r i g h t b y U h l - I n s t r u m e n t s
Live-Preset „00"
Factory-Preset „01"
Pre-stored drawbar positions of the preset
Upper-Manual
The values change simultaneously with the
changes of the real drawbars of the upper manual
M a n u a l Seite 22