Common-Presets - UHL Instruments X3-1 Owner's Manual

Common-Presets

The X3 provides 14 common presets. All settings of a sound are stored in these presets, such as percussion,
chorus/vibrato, reverb, split and audio-out routing. If none of the four LEDs is lit, the "live" setting is selected
which means that drawbars and buttons are used to adjust the sound. When pressing a preset button the stored
preset sound is recalled. Pressing the button again switches the X3 back to "live" setting.
Storing a preset: After you adjusted a sound to your liking press a preset button of your choice and keep it
pressed until the LEDs of all preset buttons start blinking. Then release the button. Your preset is now
stored and can be recalled with the respective button.
Common-Presets:
The number of common presets is derived from different combinations of the 4 preset buttons.
Up to 3 button can be pressed simultaneously to store and recall a preset:
Example 1: The preset named 1 is button 1.
Example 2: The preset named 32 is a combination of the buttons 3 + 2.
Example 3: The preset named 23 is a combination of the buttons 2 + 3.
In total there are 14 presets available.
What is stored in a common preset?
Drawbar settings (upper, lower, pedal)
Settings of percussion, reverb, chorus/vibrato, split, rotary, audio routing
14 „Common" Presets (Buttons 1–4)
C o p y r i g h t b y U h l - I n s t r u m e n t s M a n u a l Page 15