Record - Speco N4NS User Manual

-
-
o VIDEO CLIP SETUP: Setting the duration for pre and post recording.
o EVENTS AND NOTIFICATION
-
-
-
-
-
-
-
-
-

7-7-3. Record

Select RECORD tab to set the recording conditions.
These settings apply to the specified channel only.

Recording Setup
o RECORDING MODE: CONTINUOUS, SCHEDULE, MOTION
o PRE RECORD: Sets whether to perform or not pre recording.
o POST EVENT RECORD: Sets the duration of the event recording.
o AUDIO: Sets whether to perform or not audio recording.
o SCHEDULE: Sets the schedule recording.
HDD BAD SECTOR
HDD ALMOST FULL
HEALTH CHECK / RESTART / SHUTDOWN / PANIC RECORD:
Enable Email Notification in the event a problem occurs with the NS.
ALARM-IN : Enable Email Notification when the camera detects sensor
MOTION DETECTION : Enable Email Notification when the camera detects motion
NO CONNECTION: Enable Email, Beep and Alarm output Notification when the
camera signal is lost.
HDD TEMPERATURE : Enable Email Beep and Alarm output Notification when the
HDD reaches the maximum temperature
HDD BAD SECTOR : Enable Email Notification when the HDD has bad sectors.
HDD ALMOST FULL : Enable Email Notification when the HDD is almost full.
HDD FULL : Enable Email Notification when the HDD is full.
HDD FAILURE : Enable Email, Beep and Alarm output Notification when the HDD
fails.
84