Setup - Config Mode - Speco N4NS User Manual

4-9. Setup - CONFIG Mode

In the SETUP menu, select the CONFIG tab. Then, the configuration menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control.
Item
EXPORT TO
USB
IMPORT FROM
USB
LOAD DEFAULT
LOAD FACTORY
DEFAULT
SOFTWARE
UPGRADE
Figure 4.9.1. CONFIGURATION Setup Screen
Table 4.9.1. CONFIGURATION Setup
User can save the current configuration settings of the NS to a USB flash
drive. Plug in the USB flash on the front panel and press the button to start
the export process.
User can upload the configuration of the NS to another NS using the USB
Flash drive. Plug in the USB flash drive on the front panel and press the
button to start the import process.
Select this option to reset the system to the default settings.
The following settings such as Language, NS ID, Security User
Authentication, Security User P/W, Date format, DLS settings, Network
settings, HDD overwrite, Limit recording, HDD serial number, and HDD
ERROR time will not be included.
Press the button to reset the system to the factory default settings.
Upgrade softeware to the latest version.
After connecting USB flash drive to USB port on the NS, click SEARCH.
It will automatically find the upgrade file.
Description
53