Speco N4NS User Manual page 50

ADMIN, USER1, USER2, USER3:
Selected Checkbox: The user can access the function.
Blank Checkbox: The user can not access the function.
USER NAME Change the name of USER1, USER2 and USER3.
SETUP
PASSWORD Passwords can be changed for ADMIN, USER1, USER2 and USER3.
Select USER PASSWORD using the mouse or the remote control. Select username
SETUP
and enter the current password. And, enter a new password, enter the same password
again to confirm and select OK. Then the message "PASSWORD CHANGED" is
displayed.
The factory default password is 1111.
It is highly recommended to assign a new password to protect the system.
PLAYBACK Set authority level of playback on each user.
AUTHORITY Checked box: authorized to playback. Blank check box: no authority.
REMOTE Disconnect the remote playback after the specific time (Disable, 5min, 10min, 15 min,
PLAYBACK 30min, 60min.
TIMEOUT
 Click "ENTER" after naming.
50