Dts-1 Dts Decoder - Ada SSD-66 User Manual

Connections (continued)

DTS-1 DTS Decoder

The DTS-1 DTS Decoder is used to provide playback of DTS laser discs and CDs. As most
laser disc players have either a digital coax (RCA) or digital optical (TOS-Link) output, no
special laser disc is necessary for playing DTS software. Some CD players offer these out-
puts and they too can be used to provide DTS CD playback. As the SSD-66 (5.1) has only
one "Multi-Pin" input, only one DTS playback device can be connected to the SSD-66 (5.1).
ANALOGUE
AUDIO COMPOSITE
OUTPUT
R L
RIGHT & LEFT
ANOLOG AUDIO
(For DTS playback, use either the digital coax (RCA) output or the optical output)
DTS-1
DIGITAL DTS DECODER
WARNING! RISK OF HAZARDOUS ENERGY! MAKE PROPER CONNECTIONS.
AVERTISSEMENT! ENERGIE ELECTRIQUE DANGEREUSE! FAIRE DES CONNEXIONS
PROPRES POUR L'HAUTPARLEUR. VOIR LA NOTICE DE FONCTIONNEMENT.
CAUTION: DISCONNECT SUPPLY CORD BEFORE SERVICING.
ATTENTION: DEBRANCHER AVANT LE DEPANNAGE.
DTS-1
DIGITAL DTS DECODER
DIGITAL AC-3 RF DEMODULATOR
WARNING! RISK OF HAZARDOUS ENERGY! MAKE PROPER CONNECTIONS.
AVERTISSEMENT! ENERGIE ELECTRIQUE DANGEREUSE! FAIRE DES CONNEXIONS
PROPRES POUR L'HAUTPARLEUR. VOIR LA NOTICE DE FONCTIONNEMENT.
CAUTION: DISCONNECT SUPPLY CORD BEFORE SERVICING.
ATTENTION: DEBRANCHER AVANT LE DEPANNAGE.
RFD-1
AC-3 RF DEMODULATOR
OTHER AUDIO IN
1 2
AUDIO AUDIO
R INPUT L R INPUT
SUB LS
The DTS-1 has two types of inputs for connection to either a CD player or laser disc player, a
digital coax (RCA) input and an optical input (TOS-Link). To provide DTS playback, simply
connect the laser disc or CD player to one of these two inputs. Please note, that both inputs
perform identically and there is no additional benefit when using one or the other. Do not use
both the TOS-Link and the Digital RCA inputs on the DTS-1 at the same time, especially
for two different source components. Since a source with a digital output always pro-
vides some type of sync signal when it is on, connection of two different types of
digital sources to the DTS-1 at the same time, can crash the DTS-1.
If the LOCK indicator is not on:
a. Make certain that the DTS-1 is on and that its Voltage Selector Switch is set to the
appropriate voltage.
b. Make certain that you are connected to the laser disc player's digital PCM output.
c. Check to see if the laser disc or CD you are playing is DTS encoded.
OPTICAL
DIGITAL DIGITAL
VIDEO AUDIO
AUDIO
OUTPUT OUTPUT
OUTPUT
COMPOSITE DIGITAL
VIDEO OUT AUDIO OUT
OUTPUT TO SSD-66 (5.1)
MULTI-PIN CONNECTOR
"DTS" IS THE TRADEMARK OF
DIGITAL THEATER SYSTEMS.
DIGITAL
MULTI-PIN OUT
DIGITAL
RFD-1
AC-3 OUT "DOLBY", "AC-3", AND THE DOUBLE-D
SYMBOL ARE TRADEMARKS OF DOLBY
OUTPUT
LABORATORIES LICENSING CORP.
DC INPUT MUTE
DIGITAL AC-3 OUT
VIDEO IN
3 4
AUDIO AUDIO
L R INPUT L R INPUT L VIDEO IN 1 VIDEO IN 2 VIDEO IN 3 VIDEO IN 4
VIDEO I/O
MANUFACTURED UNDER LICENSE FROM
DOLBY LABORATORIES LICENSING CORP.
ADDITIONALLY LICENSED CANADIAN AVERTISSEMENT! ENERGIE ELECTRIQUE DANGEREUSE! FAIRE DES CONNEXIONS
PATENT NUMBER 1,037,877. "DOLBY",
"AC-3", "PROLOGIC" AND THE DOUBLE-D
RS R C L
SYMBOL ARE TRADEMARKS OF DOLBY
OUTPUTS LABORATORIES LICENSING CORP.
DOLBY
DIGITAL
AC-3 RF
OUTPUT
AC-3 LASER DISC PLAYER
(For only DTS playback, any Laser Disc
Player with a digital output will do.)
AC-3 RF
OUT
INPUT
Ω
INPUT
75
OPTICAL
(110V)
2/10A S.B.
(220V)
1/10A S.B. 110/220 VAC SWITCHED
50-60 Hz, 15 WATT
VOLTAGE SELECTOR
DIGITAL AUDIO (DTS) IN
RF
AC-3 IN
INPUT
(110V)
ON 2/10A S.B.
(220V)
1/10A S.B. 110/220 VAC SWITCHED
50-60 Hz, 15 WATT
VOLTAGE SELECTOR
OFF
AC-3 RF IN
AC-3 IN DTS IN
DIGITAL OUT
MULTI-PIN INPUT (For DTS-1)
DSP
VIDEO OUT DIGITAL DIGITAL DIGITAL
LOOP
INPUT 2 INPUT 1 OPTO INPUT AUX DC ADA BUS™
WARNING! RISK OF HAZARDOUS ENERGY! MAKE PROPER CONNECTIONS.
DIGITAL IN
PROPRES POUR L'HAUTPARLEUR. VOIR LA NOTICE DE FONCTIONNEMENT.
CAUTION: DISCONNECT SUPPLY CORD BEFORE SERVICING.
G 12 G T R 15
ATTENTION: DEBRANCHER AVANT LE DEPANNAGE. 1 2 1 2 3
N V N X X V
DIGITAL I/O
- 8 -
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION!
RISQUE DE CHOC ELECTRIQUE.
NE PAS OUVRIR
MADE IN U.S.A.
FUSE WARNING:
Risk of Fire! Replace Fuse
With Same Type & Rating.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION!
RISQUE DE CHOC ELECTRIQUE.
NE PAS OUVRIR
MADE IN U.S.A.
FUSE WARNING:
Risk of Fire! Replace Fuse
With Same Type & Rating.
SSD-66 (5.1)
AC-3 PREAMPLIFIER
SSD-66 (5.1) FUSE WARNING:
Risk of Fire! Replace Fuse
DOLBY DIGITAL AC-3 PREAMPLIFIER With Same Type & Rating.
(110V)
1/2A S.B. CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
(220V)
110/220 VAC SWITCHED ATTENTION!
3/8A S.B.
RISQUE DE CHOC ELECTRIQUE.
NE PAS OUVRIR
50-60 Hz, 50 WATT
4 VOLTAGE SELECTOR MADE IN U.S.A.