Table of Contents
Advertisement
Step 12
Press the VOL UP button and the display will read "CCFG=#/#". This refers to the
Coding Configuration of Channels where the first "#" refers to the number of dis-
crete front channels and the second number refers to the number of discrete rear
channels. Typically, this display will read "CCFG=3/2" describing a mix for three
front channels and two surround channels. Other possible displays can include
"CCFG=0" which means dual-mono mode, "CCFG=2/2" which means two front
and two surround channels, etc.
Step 13
Press the VOL UP button and the display will read "DS ID ###", in which the "###"
refers to the Bit Stream Identification Number.
Step 14
Press the VOL UP button and the display will read "MAIN AUDIO", "MAIN AUDIO-
D", "VISUALLY IMP", "HEARING IMP", "DIALOG", or "COMMENTARY", "EMER-
GENCY". "MAIN AUDIO" refers to main audio service. "MAIN AUDIO-D" refers to
main audio minus the dialog. "VISUALLY INP" refers to main audio service for the
visually impaired. "HEARING IMP" refers to main audio service for the hearing
impaired. "DIALOG" refers to associated service dialog. "COMMENTARY" refers
to associated service commentary. "EMERGENCY" refers to associated emer-
gency service flash.
Step 15
Press the VOL UP button and the display will read "C MIX - #.# DB", which refers to
the center channel mix level in dB from -3, -4.5, -6.
Step 16
Press the VOL UP button and the display will read "S MIX - #.# DB", which refers to
the surround channel mix level in dB from -3, -6, or none.
Step 17
Press the VOL UP button and the display will read "DLBY SURND = #", which
refers to the Dolby Surround number. If the "#" = "0" there is no indication. If the "#"
= "1" the source is not Dolby Surround encoded. If the "#" = "2", the source is Dolby
Surround encoded.
Step 18
Press the VOL UP button and the display will read "COPYRIGHT" or "NO COPY-
RIGHT", which indicates whether or not the source material is copyright protected.
Step 19
Press the VOL UP button and the display will read "ORIGINAL" or "COPY OF ORIG".
"ORIGINAL" means the source material is the original bit stream and "COPY OF
ORIG" means that the source material is a copy of the original.
Step 20
Press the VOL UP button and the display will read "DN2 =
dialog normalization for channel two.
Step 21
Press the VOL UP button and the display will read "DN = ###", which refers dialog
normalization value for normal operation.
Step 22
Press the VOL UP button and the display will read "LNG CD2 = ###" which refers to
the encoded language code for dual mono.
Step 23
Press the VOL UP button and the display will read "LNG CDE = ###", which refers
to the encoded language code for normal operation.
- 57 -
###", which refers to
Advertisement
Table of Contents
