Initial Settings; Deactivating The Demonstration Display - Sony MEX-1HD Operating Instructions Manual

Initial settings

The following settings are required before you
operate the unit for the first time, after replacing
the car battery, or changing the connection. If the
date or the time on this unit is not set correctly,
the HDD may trace the playback history
incorrectly.
1
Press the RESET button (page 8).
2
Attach the front panel (page 8).
3
Set the date and time.
1 Rotate the R dial to select the year,
then press the R dial.
2 Rotate the R dial to select the
month, then press the R dial.
3 Repeat steps 1 and 2 to set the day,
hour, minute.
The set date and time are displayed and the
clock appears.
When you set the date and time after
the initial settings
Press (MENU) and select "Time Set" in "Setup,"
then press the R dial.
Note
During the date and time setting, if Demonstration
display appears, press the R dial to display the date
and time setting display.
Tips
• The clock uses a 24-hour digital indication.
• The indication for the day of the week changes
automatically according to the date.
• If you press (F1) in step 3, the cursor moves to the
previous item.
Deactivating the
Demonstration display
In the default setting, Demonstration is set to
"On" (to active the demonstration display). After
initial setting, you must set Demonstration to
"Off."
1
Press (MENU).
MENU
2
Rotate the R dial to select "Display,"
then press the R dial.
3
Rotate the R dial to select
"Demonstration," then press the R
dial.
4
R dial Rotate the R dial to select "Off," then
press the R dial.
5
Press F3 (
The normal display appears.
).
9