Sony MEX-1HD Operating Instructions Manual page 29

For stations without alternative
frequencies
Press (F1) ( SEEK) or (F2)
(SEEK ) while the station name is
inverting (within 8 seconds).
The unit starts searching for another
frequency with the same PI (Programme
Identification) data ("PI Seek" appears).
If the unit cannot find the same PI, the unit
returns to the previously selected frequency.
Staying with one regional programme
When the AF function is on: the default setting
restricts reception to a specific region, so you
won't be switched to another regional station
with a stronger frequency.
If you leave this regional programme's reception
area or would like to take advantage of the whole
AF function.
1
Press (MENU).
2
Rotate the R dial to select "RDS," then
press the R dial.
3
Rotate the R dial to select "Regional,"
then press the R dial.
4
Rotate the R dial to select "Off."
5
Press (F3) (
).
The normal reception display appears.
Notes
• This function does not work in the United Kingdom
and some other areas.
• "Set AF On" appears and you cannot select
"Regional" in step 3 when AF is set to "Off." Set AF
to "On."
Local Link function (United Kingdom
only)
This function enables you to select other local
stations in the area, even if they are not stored on
your number buttons.
1
During radio reception, press the R
dial.
The frequencies or names assigned to the
stations appear.
2
Rotate the R dial to select a local
station stored on it, then press the R
dial.
3
Within 5 seconds, repeat this
procedure until the desired local
station is received.
29