Presetting Rds Stations With Af And Ta; Setting - Sony MEX-1HD Operating Instructions Manual

Presetting RDS stations with
AF and TA setting
When you preset RDS stations, the unit stores
each station's AF/TA setting (on/off) as well as
its frequency. You can select a different setting
(for AF, TA or both) for individual preset
stations, or the same setting for all preset
stations. If you preset stations with "AF On," the
unit automatically stores stations with the
strongest radio signal.
Presetting the same setting for all
preset stations
SOURCE
1
Press (SOURCE) repeatedly to select
"FM."
2
Press (F1) (AF) and/or (F2) (TA) to
select "AF On" and/or "TA On."
Note that selecting "AF Off" and "TA Off"
stores not only RDS stations, but also non-
RDS stations.
3
Press (MENU).
4
Rotate the R dial to select "Preset
Edit," then press the R dial.
5
Rotate the R dial to select "B.T.M.,"
then press the R dial.
B.T.M. starts.
The normal reception display appears when
station is stored.
F1 MENU
F2
R dial
Presetting different settings for each
preset station
1
Select an FM band, and tune in the
desired station (page 27).
2
Press (F1) (AF) and/or (F2) (TA) to
select "AF On" and/or "TA On."
3
Press (MENU).
4
Rotate the R dial to select "Preset
Edit," then press the R dial.
5
Rotate the R dial to select "Manual,"
then press the R dial.
6
Rotate the R dial to select the memory
number you want to store, then press
the R dial.
The normal reception display appears when
station is stored.
Repeat from step 1 to preset other stations.
31