Setting The Clock Automatically; Recording And Editing Hdd - Sony MEX-1HD Operating Instructions Manual
Hide thumbs
Also See for MEX-1HD:
- Operating instructions manual (156 pages) ,
- Service manual (124 pages) ,
- Supplementary manual (5 pages)
Table of Contents
Advertisement
Setting the clock
automatically
— CT
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
MENU
F3
R dial
1
During FM band reception, press
(MENU).
2
Rotate the R dial to select “RDS,” then
press the R dial.
3
Rotate the R dial to select “CT,” then
press the R dial.
4
Rotate the R dial to select “On.”
5
Press (F3) (
).
The normal reception display appears.
To cancel the CT function, select “Off” in step 4.
Notes
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by
the CT function and the actual time.
Recording and Editing
HDD
Overview of the HDD system
Recorded tracks on the HDD are sorted out by
folders as follows:
– When no folder is selected before recording, a
new empty album is created inside the
“Folder 001” folder and recorded tracks are
stored there automatically.
(See “CDA” and “CDB” in the diagram.)
– When a certain folder is selected before
recording, a new empty album is created inside
the selected folder and recorded tracks are
stored there automatically.
(See “CDC” in the diagram.)
Example:
“CDA” and “CDB”: No folder is selected.
“CDC”: “Folder 002” is selected.
REC
001
001
001
(CDA)
002
002
(CDB)
001
002
001
(CDC)
Folder
Album
Track
Notes
• The recorded music is limited to private use only.
Use of the music beyond this limit requires
permission of the copyright holders.
• Sony is not responsible for music files that are not
saved on this unit due to unsuccessful recording
from CD or music downloading.
• Sony is not responsible for any files that are
damaged or erased from the hard disc.
Page 33
Advertisement
Table of Contents
