Platform; Platform Control Box - JLG 80SL Service Maintenance Manual

3.11 PLATFORM

Platform Control Box

3
2
For access to the inside of the platform control box, follow
these steps:
1. Disconnect platform control box connector from the
machine.
2. Remove the six Screws (3) securing the Control Box
Lid (1) to the Control Box (2).
3. Carefully lift the lid from the box.
4. At this point, wires, plugs, and other parts may be
disconnected for repair/replacement.
3121325
1
Figure 3-25. Platform Control Box
SECTION 3 - CHASSIS, PLATFORM & SCISSOR ARMS
NOTE: When assembling the platform control box, be care-
ful not to pinch wires when replacing the lid back
onto the box.
– JLG Lift –
1. Control Box Lid
2. Control Box
3. Screw, M4 x 30
3-27