Introduction To Advanced Operations; Transferring Entries To The Phone Book; Setting Automatic Answering - Pioneer DEH-P6100BT Operation Manual

section
D (
Using Bluetooth wireless technology
• If you do not operate anything within about 30
seconds. the list display
IS
canceled automati·
cally
4 Press MULTI-CONTROL to make a call.
S To end the call. press
PHONE/~/
BTMENU.
Introduction to advanced
operations
1 Press and hold
PHONE/~
/BT MENU to
switch to TELEPHONE.
2 Press MULTI-CONTROL to display the
main menu.
3 Use MULTI-CONTROL to select
FUNCTION.
The
function menu
IS
displayed.
Turn to change the menu option, Press to se·
lect.
4 Turn MULTI-CONTROL to select the
function.
PH B TRANSFER (phone book transter)-
A.ANSWER (automatic answer setting)-
END VOLUME (Adjust the intended partis liS'
lening volume)-RING TONE (ring tone se·
lecl)-NUMBER DIAL (call by entering
number)-PRIVATE (pnvate mode)
• Notes
• To return to the playback display, press
BAND/ESC.
If you do not operate functions other than
PH B TRANSFER. and NUMBER DIAL within
about 30 seconds, the display automatically
I'eturns to the ol'dlnary display.
• You can operate
PRIVATE
only while talking
on the phone.
• If Bluetooth telephone
IS
not connected to this
unit.
NUMBER DIAL
cannol be operated
GD
En
Transferring entries to the
phone book
Phone books in your cellular phone can be
transferred to this unit by uSing your cellular
phone.
• 1000
entries for each user (max,
5
devices)
can be stored in the phone book. Each in-
dependent entry can hold five phone num·
bers and genres,
1 Display the function menu.
Refer to Introduction to advanced operations
on this page
2 Use MULTI-CONTROL to select
PH B TRANSFER.
3 Press MULTI-CONTROL to enter the
phone book transfer standby mode.
WAIT is displayed.
4 Use the cellular phone to perform
phone book transfer.
Petiorm phone book transfer using the cellu·
lar phone. For delailed instructions. refer to
the instruction manuallhat came With your
cellular phone.
When phone book transfer is completed.
DATA TRANSFER is displayed.
Setting automatic answering
1 Display the function menu.
Refer to Introduction to advanced operations
on Ihis page.
2 Use MULTI-CONTROL to select
A.ANSWER.
3 Press MULTI-CONTROL to turn auto-
matic answering on.
• To turn automatic answenng function off.
press
MULTI-CONTROL
again.