Ipod Compatibility; About Handling The Ipod; About Ipod Settings; Bluetoolh Profiles - Pioneer DEH-P6100BT Operation Manual

Cd receiver
Hide thumbs Also See for DEH-P6100BT:
Table of Contents

Advertisement

APpendiX:-;~;-;~~_--;-;---;
-::
_
( Additional Information
)
iPod compatibility
• This Unit supports only the following iPod
models. Supported iPod software versions
are shown below. Older versions of iPod
software may not be supported.
-
iPod nano first generation (software ver-
sion
1.3.1)
-
iPod nano second generation (software
version 1.1.3)
-
iPod nano third generation (software
version 1.1,2)
-
iPod fifth generation (software version
130)
-
iPod classic (software version 1.1 ,2)
-
tPod touch (software version 2.0)
-
iPhone 3G (software version 2.0)
-
iPhone (software version 2.0)
Depending on the generation or version of
the iPod. some functions can not be oper-
ated.
• Operations may vary depending on the soft-
ware version of iPod.
• When using an iPod. iPod Dock Connector
to USB Cable (CD-IU50) is required. For de-
tails, consult your dealer. ~
About handling the iPod
A
CAUTION
• Pioneer accepts no responsibility for data lost
on the iPod even if that data is lost while
uSing thiS unit
Do not leave the iPod in direct sunlight for ex-
tended amounts of time. Extended exposure
to direct sunlight can result in iPod malfunc-
tion due to the resulting high temperature.
Do not leave the iPod in a high temperature.
Firmly secure the iPod when driving. Do not
let the iPod fall onto the floor. where it may be-
come jammed under the brake or accelerator
pedal.
For details. refer to the ,Pod's manuals.
CID
En
About iPod settings
• When an iPod is connected. this unit
changes the EO (equalIZer) setling of the
iPod to Flat in order to optimize the acous·
tics. When you disconnect the IPod. the EO
returns to the original setting.
• You cannot set Repeat to off on the iPod
when using this unit. Even if you set Repeat
to off on the iPod. Repeat IS automatically
changed to All when connecting the iPod
to this unit.~
Bluetooth profiles
• In order to use Bluetooth wireless technol·
ogy. devices must be able to interpret cer-
tain profiles. This unit is compatible with
the following profiles,
-
A2DP (Advanced Audio Distnbution
Profile)
-
AVRCP (AudioNideo Remote Control
Profile)
-
GAP (Genellc Access Profile)
-
SDP (Service Discovery Protocol)
-
OPP (Object Push Profile)
-
HFP (Hands Free Profile)
-
PBAP (Phone Book Access Profile)
-
SPP (Sellal Port Profile)~
Copyright and trademark
notice
WMA
_ . Play,
_ . c.::W' " ' l nd' : -O-W' - ---I
'N
MediaTt~
Windows Media and the Windows logo are tra-
demarks or registered trademarks of Microsoft
Corporation
In
the United States and/or other
countries.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents