Displaying The Radio 10; Sirius Satellite Radio Tuner; Listening To Sirius Satellite Radio; Switching The Sirius Display - Pioneer DEH-P6100BT Operation Manual

(Available accessories
section
)aI
• Press S.Rtrv/SAT MODE repeatedly to
select the desired channel select setting.
CH NUMBER (channel number select setting)
-CATEGORY (channel category seleel
setll ng)
• If you do not operate the function within about
30 seconds. the display is automatically returned
to the channel display,
iii
Note
You can also perform this operation in the menu
thai appears by using MULTI-CONTROL
Selecting a channel in the channel
category
1 Switch the channel select settings to
CATEGORY.
Refer to Selecting the XM channel select mode
on the previous page.
2 Push MULTI-CONTROL up or down to
select the desired channel category.
3 Push MULTI-CONTROL left or right to
select the desired channel in the selected
channel category.
Displaying the Radio 10
Channel number select setting
1 Select the channel select settings to
CH NUMBER.
Refer to Selecting the XM channel select mode
on the previous page.
2 Push MULTI-CONTROL left or right to
select RADIO ID.
• If you select another channel. display of the 10
cod,? is canceled
• Display of the 10 code repeats displaying
RADIO 10 and the 10 code one after the other.C!J
SIRIUS Satellite Radio tuner
Listening to SIRIUS Satellite Radio
You can use this und to control a SIRIUS Sa/el-
lite Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit. some operations differ slightly from
those described
In
the SiRIUS operation man-
ual. This manual provides information on
these points. For all other information on
uSing the SIRIUS tuner. please refer to the SIR-
IUS operation manual,
• Selecting a SIRIUS band
Press BAND/ESC.
• Band can be selected from SR1. SR2 or SR3.
• Selecting a channel
Push MULTI-CONTROL left or right.
• If you push and hold MULTI-CONTROL left or
right. you can increase or decrease channel num-
ber continuously.
• You can also perform tuning from a desired
channel category, (Refer to Selecting the SIRIUS
channel select mode on the next page.)
iii
Note
It may take a few seconds before you can hear
anything while thiS unit acquires and processes
the satellite signal when you change the source
to
SIRIUS
tuner or select a channel.
Switching the SIRIUS display
• Press DISP/SCRL to switch the SIRIUS
display.
Each press of DISP/SCRL changes the SI RIUS
display in the following order:
Play time-Channel number-Channel name
~Category name~Artlst name~Song
title!
program title~Composer name
• Play time is displayed during the Instant Re-
play mode, Refer to Using Instant Replay function
on page 52.
En
®