Optical Adjustments - Sanyo PLC-XP30 User Manual

Optical Adjustment

Optical Adjustments

- Adjustment requires a 2.0mm Ball allen driver.
R/G/B Polarized glass adjustment
R/G/B Polarized glass adjustment
1. Red----Cover the G and B panel to cut the light transit.
Green---Cover the R and B panel to cut the light transit.
1. Loosen a screw "A" (Fig. 12) on the polarized glass mounting base which
Blue----Cover the G and R panel to cut the light transit.
you intend to adjust.
2. Loosen a screw "A" (Fig. 12) on the polarized glass mounting base
2. Turn the polarized glass mounting base as shown in Fig.14, adjust the low-
which you intend to adjust.
est level in black.
3. Turn the polarized glass mounting base as shown in Fig.14, adjust
3. Tighten the screw "A" to fix the polarized glass mounting base.
the lowest level in black.
4. Tighten the screw "A" to fix the polarized glass mounting base.
R
Fig. 13
2.0mm Ball allen driver.
B
-39-
Fig. 14
Fig. 12
Screw A