Electrical Adjustments - Sanyo PLC-XP30 User Manual

ELECTRICAL ADJUSTMENTS

SERVICE MODE OPERATION
*To change the mode from the Normal mode to the Service mode
by pressing the "MENU" and "NORMAL" buttons on the pro-
jector simultaneously and hold for 5 seconds.
*Press the "POWER on/off" button on the projector or remote
control unit to quit the service mode.
*Adjust the service data with the following control buttons.
1. Press the "POINT up/down" buttons on the projector to change
the adjustment item.
2. Press the "VOLUME + /-" buttons on the projector to adjust
the data value.
Normal Mode
"MENU"
"NORMAL"
"POWER
ON/OFF"
Data no.
Service
001
Mode
"POINT UP/DOWN"
Adjustment item
Service Mode
Data
001F
"VOLUME +/-"
Adjustment value
-27-
Service mode adjustment Menu
Adjustment Item
Data no.
00 3-1. R-DC adjustment
01 3-2. G-DC adjustment
02 3-3. B-DC adjustment
03 5. A/D Input adjustment
04 6-1. G-CG gain adjustment
05 6-2. G-DVI gain adjustment
06 7. Sample hold clock adjustments
07 8-1. G AV clp adjustment
08 10. Video Gain adjustments
09 10. Video Gain adjustments
0A. 8-2. R AV clp adjustment
0B 8-3. B AV clp adjustment
0C 9-1. R AV bri adjustment
0D 9-2. G AV bri adjustment
0E 9-3. B AV bri adjustment
0F 10. Video Gain adjustments
10 11-1. G CG Video adjustment (Gamma off)
10 11-2. G AV Video adjustment (Gamma off)
12 12-1. G CG Video adjustment-1
12 12-4. G CG Video adjustment-2
12 13-1. G AV Video adjustment-1
12. 13-4. G AV Video adjustment-2
13 15. White balance adjustment
14 15. White balance adjustment
15 12-1. G CG Video adjustment-1
15 13-1. G AV Video adjustment-1
17 12-2. R CG Video adjustment
17 13-2. R AV Video adjustment
18 12-3. B CG Video adjustment
18 13-3. B AV Video adjustment
1F 14. Common center adjustments
20 14. Common center adjustments
21 14. Common center adjustments
2A 7A. Vertical noise lines adjustments
2C 7A. Vertical noise lines adjustments
5D Logo SW (Logo mark on/off) 00: off / 01: on
60 Lamp illumination time (read only)
61 RS232C Bit rate set 00: 9600 / 01: 19200
63 AV mode on/off 00: Comp. & AV / 01: Comp. only
C0 16. Correction of Uneven Color (Data Reset)
C1 16. Correction of Uneven Color (Operation mode)
Caution:
Other adjustment items are not related to the
service and maintenance, don't press VOLUME
(+)(-) buttons when the those items.