Electrical Adjustments; Service Adjustment Menu Operation - Sanyo PLC-WK2500 Service Manual

Electrical Adjustments

Service Adjustment Menu Operation

to enter the service mode
To enter the "Service Mode" , press and hold the
than 3 seconds or press and hold the
menu appears on the screen as follows.
to adjust service data
Select the adjustment Group No. by pressing the
select the adjustment Item No. by pressing the pointer
7 or 8 button
. Refer to the "Service Adjustment Data Table" for further description of adjustment Group No., Item
No. and data value.
to exit the service mode
To exit the service mode, press the
Service Mode
Input Computer 1
Group No. Data
0 0
Ver. R 0.00
Group No. Item No.
MeNu button
MeNu button
ON/StANd-BY button
+179
Data value
SeLeCt button
and
on the remote control for more than 20 seconds. The service
MeNu button
(increase) or
e
or d button
, and change the data value by pressing the
.
-29-
on the projector for more
SeLeCt button
(decrease), and