Wash programs don't have dedicated buttons, but are selected
by scrolling with left ("<") and right (">") scroll buttons.
turning on dishwashers, scroll left or right to the desired wash
program (shown by lit LED displays between scroll buttons). To
start the desired program, press the Start button.
Reset ("Cancel – drain")
To reset, press and hold Start button until Active light goes out
or when display shows "0.01" -- for integrated models (with
buttons on top of the door), open door just enough to expose
buttons. Wait about one minute for dishwasher to stop draining --
with integrated models, door must be closed for dishwasher to
drain. To reset dishwasher, turn it off after it stops.
Changing basic settings
Extra Dry feature can be turned on or off and rinse-aid dosage
can be changed using dishwasher controls. For many integrated
models, End of Cycle tone volume can also be changed.
SHE "Evolution" models
Turn dishwasher on, press and hold ">" button, then press and
hold Start button. Clean and Sanitized lights will be flashing
(Extra Dry mode). When lights are flashing, release buttons.
SHE Extra Dry
SHE Rinse Aid
Page 6 of 50