Controls - Bosch SHE4AM12U Repair Instructions

7. Whether the dishwasher is upside-down or on it's back, all
bottom accessible parts are accessible (see below).
5.2

Controls

5.2.1 Fascia panel mounted controls (integrated models)
Controls are easily removed from fascia panels by prying plastic
tabs.
Tools needed: T-20 Torx & flat blade screwdrivers.
1. Remove fascia panel – section 5.1.2.2.
remove outer door first (below left).
2. For dishwashers with separate short wire harnesses,
disconnect them from both ends of fascia panel (below
right).
702_58300000130262_ara_en_c
3. Disconnect wire harnesses from control (below left).
4. Carefully pry back plastic tabs, then slide module from
console (below right).
5. Replacement controls include the translucent button cover,
so there's no need to remove it.
If needed,
m CAUTION – 80% of all controls returned
for analysis check out OK. Most control
issues are due to loose connections.
Page 24 of 50