2
Chapter
Embroidery Step by Step
Follow the steps below to prepare the machine for embroidery.
Step 2
Step 1
Step #
Aim
1
Checking the needle
2
Embroidery unit attachment
3
Bobbin thread setup
4
Fabric preparation
5
Embroidery frame attachment
6
Pattern selection
7
Checking the layout
8
Embroidery thread setup
* It is recommended that a 90/14 needle should be used when embroidering on heavy weight fabrics or stabilizing products (for example;
denim, puffy foam, etc.).
STARTING TO
EMBROIDER
Step 8
Step 3
Step 5
Step 4
Use needle 75/11 for embroidery. *
Attach the embroidery unit.
For the bobbin thread, wind embroidery bobbin thread and set it in place.
Attach a stabilizer material to the fabric, and hoop it in the embroidery frame.
Attach the embroidery frame to the embroidery unit.
Turn the main power to on, and select an embroidery pattern.
Check and adjust the size and position of the embroidery.
Set up embroidery thread according to the pattern.
Embroidery Step by Step
Step 6, 7
Action
Basic operations B-25
B
Page
B-23
B-26
B-17
B-29
B-35
B-9
B-35
B-28