Brother 888-g80 Operation Manual page 51

d
Press to display "e" on the screen, and then enter
"e".
• After selecting a character if you would like to
change the character size press
changes each time you press the key, from large to
medium to small.
• If you make a mistake, press
• If the pattern is too small to see clearly, you can use
the key to check it.
• If you want to add multiple lines, refer to "Entering a
line feed" on page E-4.
Memo
• If you continue adding characters after changing
the size, the new characters will be entered in the
new size.
• You cannot change the size of the entered
characters after combining character stitch
patterns.
e
Press , and then press
. The size
to erase the mistake.
to enter a space.
f
Press , and then enter "F".
g
Press to display "l" and "y", and enter them.
h
Press .
→ The editing screen is displayed.
i
Proceed to "Editing Patterns" on page E-5 to edit the
pattern.
• For details on editing characters, refer to "Editing
Character Patterns" on page E-9.
• To return to the previous screen to select another
pattern, press .
Selecting Patterns
E
Embroidering E-3