Changing The Font Of Entered Characters; Changing Character Spacing; Reducing Character Spacing; Separating Combined Character Patterns - Brother 888-g80 Operation Manual

Editing Character Patterns

Changing the font of entered characters

After text has been entered, the font can be changed.
a
Press .
b
Select the font that you wish to use.
→ The text appears in the screen with the new font
applied.
Note
• Depending on the font that was selected, it may
not be possible to change the font.

Changing character spacing

a
Press .
b
Press / to increase or decrease the character
spacing.
• Press to return the pattern to its original
appearance.
c
Press to return to the font editing screen.
E-10

Reducing character spacing

The spacing between characters can be reduced to 50% of the
narrowest character in the group.
Note
• It is not recommended to edit data and transfer
to other or older version machines. Same
features do not apply in other machines, so
problems may occur.
• Character spacing can be reduced only when
characters are arranged normally on a straight
line.

Separating combined character patterns

Combined character patterns can be separated to adjust the
character spacing or to separately edit the patterns after all
characters have been entered.
a
Press .
b
Use to select where the pattern is to be
separated, and then press
example, the pattern will be separated between "A"
and "B".
Note
• A separated character pattern cannot be
combined again.
to separate it. For this